Yükleniyor
Şah Mah. Nusaybin Cad. No:71 İç Kapı No:3 Cizre / ŞIRNAK / Türkiye
+90 536 220 2962 Monday - Saturday 08:30 - 18:00

Makonat Eco - Machine Plaster

Bagged paint that can be applied directly by machine to materials such as brick, concrete, exposed concrete, aerated concrete, pumice block, etc...

Makonat Eco - Machine Plaster
Quality product, reliable supply and fast delivery support.
Plaster

Makonat Eco - Machine Plaster

Bagged paint that can be applied directly by machine to materials such as brick, concrete, exposed concrete, aerated concrete, pumice block, etc...

MAKONAT EKO
It is a ready-to-use, bagged gypsum-based plaster that can be applied directly by machine onto materials such as brick, concrete, exposed concrete, aerated concrete, pumice block, etc. It is a Class A1 non-combustible material that provides sound insulation.

 

  MAKONAT EKO
Fiziksel Form Beyaz toz
Alçı/Su Oranı 4-5 Lt Suya 10 Kg
Kullanım Süresi 130-180 Dakika
Donma Süresi 250-300 Dakika
Kuru Birim Ağırlığı 900-1000 Kg/m3
Tüketim Miktarı 11-12 Kg/m2 ( Her 1 cm Kalınlıkta )
Basınç Mukavemeti ≥ 2,0 N/mm2
Eğilme Mukavemeti ≥ 1,0 N/mm2
Bağ Dayanımı -
Yangina Tepki Sınıfı A1
İlgili Standart TS EN 13279-1,2 ( Tip B4- Makine ile uygulanan)
 

APPLICATION SURFACE AND ENVIRONMENT

The surface must be free of dirt, oil, paint, and other contaminants.
Excessively dry, hot, and highly absorbent surfaces should be moistened with water.
The surface of ceilings should be roughened or primed with a material that ensures the adhesion of the mortar to the surface before plaster application.
Care should be taken to ensure there is no air current or draft during application.
The application temperature should be between +5 and +40 °C.

APPLICATION

The plaster is prepared in a plastering machine with the appropriate plaster/water ratio (4-5 liters of water/10 kg of MAKONATEKO).
The mortar is sprayed onto the surface with the machine.
The application thickness is determined using anodes according to the smoothness of the surface.
The plaster applied to the surface is leveled with a trowel.
When the surface begins to harden, it is leveled with a steel trowel.
When the surface reaches a consistency where it does not collapse when lightly pressed with a finger, the finishing process is carried out. After the troweling process, the surface is polished again with a steel trowel to prepare it for painting.

PACKAGING

35 kg polypropylene bag (± 2%)

STORAGE

Stack a maximum of 15 bags on top of each other in a dry place.
Bags should be stored without contact with the ground and protected from moisture and condensation. Must be used within 6 months of the production date.